Tutorial 3: Upgrade an app with containers¶

Introduction¶

The Snowflake Native App Framework allows providers to build, sell, and distribute apps within the Snowflake Data Cloud. Providers can create apps that leverage core Snowflake functionality to share data and application logic with consumers. Apps can also implement Snowpark Container Services to facilitate the deployment, management, and scaling of containerized apps within the Snowflake ecosystem.

The Snowflake Native App Framework allows providers to make updates to an app and publish new version or patch to consumers. This tutorial describes how to perform the following tasks:

Add a version initializer to the app.
Create versions and patches for changes made to the app.
Upgrade the app in the consumer account.

Prerequisite tutorials¶

This tutorial assumes that you know how to develop a basic Snowflake Native App and can create a Snowflake Native App with Snowpark Container Services. This tutorial builds on the knowledge gained from completing the following tutorials:

Before following this tutorial to upgrade an app with containers, ensure that you have completed both of these tutorials.

Caution

This tutorial builds on the app you created in Tutorial 2: Create an app with containers. If you do not have the application files and Snowflake objects in your account, you must work through that tutorial again before starting this tutorial. See Verify the app from the previous tutorial exists in your account for more information.

What you learn in this tutorial¶

This tutorial expands the app with containers you created in Tutorial 2: Create an app with containers. In this tutorial you learn how to:

Use the version initializer callback function to handle service upgrades and failures.
Create version definitions for an app.
Upgrade an app.
Simulate upgrade failure for an app.
Create a patch for the app to fix the failure.

Verify the app from the previous tutorial exists in your account¶

To verify that the app with containers you created in Tutorial 2: Create an app with containers is still available in your account, perform the following tasks:

Caution

If any of the following tasks does not complete successfully, you will need to perform Tutorial 2: Create an app with containers again.

To verify that Snow CLI is configured correctly, run the following command:

snow connection test -c tut-connection

Copy

The output of this command should be similar to the following:

+----------------------------------------------------------------------------------+
| key             | value                                                          |
|-----------------+----------------------------------------------------------------|
| Connection name | tut-connection                                                 |
| Status          | OK                                                             |
| Host            | USER_ACCOUNT.snowflakecomputing.cn                            |
| Account         | USER_ACCOUNT                                                   |
| User            | tutorial_user                                                  |
| Role            | TUTORIAL_ROLE                                                  |
| Database        | TUTORIAL_IMAGE_DATABASE                                        |
| Warehouse       | TUTORIAL_WAREHOUSE                                             |
+----------------------------------------------------------------------------------+

Copy

This command verifies the following requirements:

The Snow CLI connection is working.
The TUTORIAL_ROLE exists.
The TUTORIAL_WAREHOUSE exists.

To verify that the other required Snowflake objects exist, run the following commands from a worksheet:
```
USE ROLE tutorial_role;
```
Copy
```
SHOW DATABASES LIKE 'tutorial_image_database';
```
Copy
```
SHOW SCHEMAS LIKE 'tutorial_image_schema';
```
Copy
```
SHOW IMAGE REPOSITORIES LIKE 'tutorial_image_repo';
```
Copy
Each of these commands should return the name of each Snowflake object.
To verify that the service is still running, run the following command from a worksheet:
```
CALL na_spcs_tutorial_app.app_public.service_status();
```
Copy

Ensure that your local directory structure looks like the following example:

├── app
    └── manifest.yml
    └── README.md
    └── setup_script.sql
├── README.md
├── service
    └── echo_service.py
    ├── echo_spec.yaml
    ├── Dockerfile
    └── templates
        └── basic_ui.html
├── snowflake.yml

Copy

You may also see a folder called output that contains the app files generated by the snow app run command.

Drop the application object¶

If the app you created when working through Tutorial 2: Create an app with containers still exists in your account, you must drop the application object before proceeding with this tutorial.

Note

You must drop the existing app because an app created in development mode directly from staged files cannot be upgraded.

To determine whether the app from the previous tutorial (na_spcs_tutorial_app) exists in your account, run the following command from a worksheet:
```
SHOW APPLICATIONS LIKE 'na_spcs_tutorial_app';
```
Copy
If the na_spcs_tutorial_app app appears in the output of this command, drop the app by running the following commands from a worksheet:
```
USE ROLE tutorial_role;
DROP APPLICATION IF EXISTS na_spcs_tutorial_app CASCADE;
```
Copy

What you completed in this section¶

In this section, you verified that the application files and Snowflake objects from the previous tutorial are still working in your account.

In the next section, you will learn more about versions and upgrades in the Snowflake Native App Framework.

Understand versions, patches and upgrades¶

The section introduces you to the concepts covered in this tutorial, including:

Versions and patches
Upgrades
The version initializer

About versions and patches¶

Versions in the Snowflake Native App Framework are combinations of version and patch numbers. These are defined in the application package.

. rst-class:: bulleted-definition-list

Version: Generally contains major updates to a Snowflake Native App. Versions are defined in an application package.
Patch: Generally contains smaller updates to a Snowflake Native App. Like versions, patches are defined in the application package.

Note

An application package can only have two active versions at one time. A single version of an app can have up to 130 patches.

About upgrades¶

Within the context of the Snowflake Native App Framework, upgrades are updates to a version or patch of a Snowflake Native App that is installed in the consumer account. The Snowflake Native App Framework supports two types of upgrades:

Automated upgrades: Automated upgrades are upgrades that are initiated by the provider. When a new version or patch is available, the provider modifies the release directive on the application package. This triggers an automatic upgrade of all installed instances of the app specified by the release directive.
Manual upgrades: Manual upgrades are upgrades that are initiated by the consumer in response to communication from the provider. Manual upgrades are useful when a provider needs to quickly release an update, such as a bug fix, to a consumer.

Note

This tutorials describes how to perform a manual upgrade for an app with containers.

When a new version or patch is available, the provider modifies the release directive on the application package and then notifies the consumer that a new version is available.

The consumer performs the upgrade by running the ALTER APPLICATION command in their account to perform the upgrade. In general, manual upgrades allow the consumer to upgrade their installed app faster than automated upgrades.

About the version initializer¶

A version initializer is used to start or upgrade services or other related processes. The version initializer is a callback stored procedure defined in the manifest file and implemented in the setup script. The version initializer callback function is invoked in the following contexts:

During installation, the version initializer is called as soon as the setup script of the app finishes without errors.
During upgrade, there are two possible scenarios where the version initializer is called:
- If the setup script of the new version succeeds, then the new version of the version initializer is called.
- If the setup script or the version initializer of the new version fails, then the version initializer of the previous version is called. This allows the version initializer of the previous version to use the ALTER SERVICE command to revert the services to the previous version.

Add a version initializer to the app¶

In the previous tutorial, you created a basic app with containers. In this section you update this app to add a version initializer to the app. You also add a version to the application package.

Add the version initializer to the manifest file¶

The version initializer is defined in the manifest file of the app. To define the version initializer, add the following code to the end of the manifest.yml file:

lifecycle_callbacks:
  version_initializer: app_public.version_init

Copy

This specifies the schema and name of the stored procedure used as the version initializer. In the next section, you implement the version_init stored procedure.

Add the version initializer as a stored procedure to the setup script¶

In the previous section, you added the name of the version initializer to the manifest file. In this section, you add the code for the stored procedure to the setup script.

Add the following code at the end of the setup_script.sql file:

CREATE OR REPLACE PROCEDURE app_public.version_init()
RETURNS STRING
LANGUAGE SQL
AS
$$
DECLARE
can_create_compute_pool BOOLEAN;  -- Flag to check if 'CREATE COMPUTE POOL' privilege is held
BEGIN
-- Check if the account holds the 'CREATE COMPUTE POOL' privilege
   SELECT SYSTEM$HOLD_PRIVILEGE_ON_ACCOUNT('CREATE COMPUTE POOL')
      INTO can_create_compute_pool;

   ALTER SERVICE IF EXISTS core.echo_service
      FROM SPECIFICATION_FILE = 'service/echo_spec.yaml';
   IF (can_create_compute_pool) THEN
      -- When installing app, the app has no 'CREATE COMPUTE POOL' privilege at that time,
      -- so it will not execute the code below

      -- Since the ALTER SERVICE is an async process, wait for the service to be ready
      SELECT SYSTEM$WAIT_FOR_SERVICES(120, 'core.echo_service');
   END IF;
   RETURN 'DONE';
END;
$$;

Copy

Upload the changed files and create a version¶

After modifying the setup script, upload the modified files to the stage and create a version by performing the following procedure:

Run the following command to upload the files and create a version:
```
snow app version create v1 -c tut-connection
```
Copy

The snow app version command uploads the updated files to the stage. If the application package and files already exist, this command only uploads files that have changed.

This command creates a new version of the app called v1 with the default patch set to 0.

Set the default release directive for the app¶

In the previous section, you uploaded the changed files and created version v1 of the app. In this section, you set the default release directive to use version v1.

To update the default release directive run the following command from a worksheet:

ALTER APPLICATION PACKAGE na_spcs_tutorial_pkg
  SET DEFAULT RELEASE DIRECTIVE VERSION=v1 PATCH=0;

Copy

When you set the default release directive for an app, consumers automatically install that version when they install the app in their account. In the next section, you create the app in your local account based on the release directive.

Create and test the app¶

Now that you have added a version and set the default release directive, you can create the app and grant the required privileges:

Create the app from the release directive by running the following command:
```
snow app run --from-release-directive -c tut-connection
```
Copy
This command creates the app using the release directive you defined in the previous section.

After creating the app, grant the required privileges to the app to be able to run it by running the following commands from a worksheet.

GRANT CREATE COMPUTE POOL ON ACCOUNT TO APPLICATION na_spcs_tutorial_app;
GRANT BIND SERVICE ENDPOINT ON ACCOUNT TO APPLICATION na_spcs_tutorial_app;

Copy

Call the app_public.start_app procedure that you defined in the setup_script.sql file: by running the following command from a worksheet:
```
CALL na_spcs_tutorial_app.app_public.start_app();
```
Copy
Confirm the function was created by running the following command from a worksheet:
```
SHOW FUNCTIONS LIKE '%my_echo_udf%' IN APPLICATION na_spcs_tutorial_app;
```
Copy
To verify that the service has been created and healthy, run the following command from a worksheet:
```
CALL na_spcs_tutorial_app.app_public.service_status();
```
Copy
To call the service function to send a request to the service and verify the response, run the following command from a worksheet:
```
SELECT na_spcs_tutorial_app.core.my_echo_udf('hello');
```
Copy
To view information about the app, run the following command from a worksheet:
```
DESC APPLICATION na_spcs_tutorial_app;
```
Copy

Review what you learned in this section¶

In this section, you completed the following tasks:

Learned about the version initializer and how you can add it to the manifest file and the setup script.
Learned the basics of versions and patches in the Snowflake Native App Framework.
Set the default release directive to point to a specific version of an app.
Installed the app based on the release directive.
Tested the app by calling a stored procedure and used the DESCRIBE APPLICATION command to view the status of the app.

Note

In this tutorial you created the application object in your local account and used the DESCRIBE APPLICATION command. This mimics the behavior of the app in the consumer account.

Update the app and upgrade to a new version¶

In the previous section, you modified the original app by adding the version initializer as a stored procedure. You also created a new version of the app, version v1, based on the default release directive.

In this section, you make another change to the app, create version v2, update the default release directive, and upgrade the installed app from version v1 to version v2.

Add a new table to the app¶

To simulate adding a new feature to your app, add a new table to the setup script.

Add the following commands to the end of the setup_script.yml

CREATE TABLE IF NOT EXISTS core.setup_script_run(run_at TIMESTAMP);
GRANT SELECT ON TABLE core.setup_script_run to APPLICATION ROLE app_user;
INSERT INTO core.setup_script_run(run_at) values(current_timestamp());

Copy

Create a version of the app¶

To upload the modified setup script to the stage and create version v2 of the app:

Run the following command inside the na-spcs-tutorial folder:

snow app version create v2 -c tut-connection

Copy

This command creates a new version of the app called v2 with the default patch set to 0.

The snow app version command uploads the updated files to the stage. If the application package and files already exist, this command only uploads files that have changed.

Set the default release directive for the app¶

After creating version v2 of the app, set the release directive for the application package by running the following command from a worksheet:

ALTER APPLICATION PACKAGE na_spcs_tutorial_pkg
  SET DEFAULT RELEASE DIRECTIVE VERSION=v2 PATCH=0;

Copy

This command sets the release directive to version v2 and patch 0.

Upgrade the app from v1 to v2¶

Now that you have updated the release directive to point to the new version, upgrade the app by running the following command from a worksheet:

snow app run --from-release-directive -c tut-connection

Copy

Test the upgraded app¶

After upgrading the app, test the app by running the following command from a worksheet:

SELECT na_spcs_tutorial_app.core.my_echo_udf('hello');

Copy

Review what you learned in this section¶

Congratulations! You successfully upgraded the app from version v1 to version v2.

In this section, you completed the following tasks:

Updated the app to include a table.
Created a new version for the app based on this update.
Updated the default release directive to point to the new version.
Manually upgraded the app.

In the next section, you upgrade the service of the app and simulate an error in the upgrade process by intentionally adding an error in the setup script.

Simulate an upgrade error¶

In the previous section, you added a new table to the app, created a new version, and upgraded the app.

In this section you update the service specification to simulate an update to the service. You also add an intentional error to the setup script to simulate an upgrade failure, which shows you how the version initializer handles service upgrades when the upgrade fails.

Update the service specification file¶

In this section, you update the service specification of the app to simulate a change to the service.

In the service/echo_spec.yaml file, change the value of CHARACTER_NAME from Bob to Tom.

This change causes the service to return the following message:
```
`Tom said hello.`
```
Copy

The purpose of this change is to allow you to see which version of the service is running after attempting an upgrade in the following sections.

Update the setup script to include an intentional error¶

To simulate an error during the upgrade process, introduce an intentional error in the setup script by adding a SELECT statement for a table that does not exist.

Add the following statement to the end of the app_public.version_init() procedure in the setup_script.sql.

SELECT * FROM table_does_not_exist;

Copy

This statement is syntactically correct, but refers to a table that does not exist. This causes an error when the setup script runs during upgrade.

After making this change, the app_public.version_init() function should look like the following example:

GRANT USAGE ON PROCEDURE app_public.service_status() TO APPLICATION ROLE app_user;

CREATE OR REPLACE PROCEDURE app_public.version_init()
RETURNS STRING
LANGUAGE SQL
AS
$$
DECLARE
  -- Flag to check if 'CREATE COMPUTE POOL' privilege is held
  can_create_compute_pool BOOLEAN;
BEGIN
   -- Check if the account holds the 'CREATE COMPUTE POOL' privilege
   SELECT SYSTEM$HOLD_PRIVILEGE_ON_ACCOUNT('CREATE COMPUTE POOL')
     INTO can_create_compute_pool;

   ALTER SERVICE IF EXISTS core.echo_service
     FROM SPECIFICATION_FILE = 'service/echo_spec.yaml';
   IF (can_create_compute_pool) THEN
     -- When installing app, the app has no 'CREATE COMPUTE POOL' privilege at that time,
     -- so it will not execute the code below

     -- Since the ALTER SERVICE is an async process, wait for the service to be ready
     SELECT SYSTEM$WAIT_FOR_SERVICES(120, 'core.echo_service');
   END IF;

   -- trigger an error. The upgrade fails
   SELECT * FROM non_exist_table;

   RETURN 'DONE';
END;
$$;

Copy

Upload the revised files and create a new patch¶

In previous sections, you updated the service specification and setup script of the app.

To upload the files and create a new patch for the app, perform the following tasks:

Run the following command to add a patch to the application package.

snow app version create v2 --patch 1 -c tut-connection

Copy

When prompted, enter y to add a new patch to the application package.

Set the default release directive for the app¶

In the previous section, you uploaded the files and created a patch for the updates. To set the default release directive for the patch, run the following command from a worksheet:

ALTER APPLICATION PACKAGE na_spcs_tutorial_pkg
  SET DEFAULT RELEASE DIRECTIVE VERSION=v2 PATCH=1;

Copy

This command sets that patch for the app to patch 1.

Upgrade the app¶

In the previous sections, you made updates to the app and created a new patch. In this section, you upgrade the app with the expectation that it fails due to the error you introduced in previous sections.

To upgrade the app, run the following command:

snow app run --from-release-directive -c tut-connection

Copy

To view the upgrade state of the app, run the following command from a worksheet:

DESC APPLICATION na_spcs_tutorial_app;

Copy

This command displays information about the app including the upgrade state, the number of upgrade attempts, and the reason for an upgrade failure.

After the upgrade fails, Snowflake CLI returns the following message:

Object 'TABLE_DOES_NOT_EXIST' does not exist or not authorized.'

Copy

Also, after the upgrade fails, the DESC APPLICATION command displays the following properties related to upgrades:

Property

Value

upgrade_state

FAILED

upgrade_failure_reason

upgrade_failure_reason[ErrorCode 2003] Uncaught exception of type ‘STATEMENT_ERROR’ on line 89 at position 0 : Uncaught exception of type ‘STATEMENT_ERROR’ on line 19 at position 3 : SQL compilation error: Object ‘TABLE_DOES_NOT_EXIST’ does not exist or not authorized.

Property	Value
upgrade_state	FAILED
upgrade_failure_reason	upgrade_failure_reason[ErrorCode 2003] Uncaught exception of type ‘STATEMENT_ERROR’ on line 89 at position 0 : Uncaught exception of type ‘STATEMENT_ERROR’ on line 19 at position 3 : SQL compilation error: Object ‘TABLE_DOES_NOT_EXIST’ does not exist or not authorized.

Run app service to see which version of the service is running¶

In the previous section, you simulated a failure when upgrading from version v2, patch 0 to version v2, patch 1.

To determine which version of the service is currently running, run the following command from a worksheet.

SELECT na_spcs_tutorial_app.core.my_echo_udf('hello');

Copy

This command returns the following string:

Bob said hello

Copy

Here, you see that since the upgrade failed, the app continues to run the service from v2, patch 0.

However, if you did not include a version initializer in the app, the upgrade process would have upgraded the service to v2, patch 1 although the app upgrade failed. If an app upgrade fails, the version initializer ensures that the version of the service does not upgrade and continues to be in sync with the app.

Review what you learned in this section¶

In this section, you completed the following tasks:

Introduced an error in the setup script to simulate an error in the upgrade process.
Verified the version of both the app and service after the failure.
Learned how the version initializer ensures that the version of a service is in synch with the version of the app when an upgrade fails.

Create a patch to fix the upgrade error¶

In the previous section, you introduced an error in the setup script of the app. When you upgraded the app, you were able to verify that both the app and the service were continuing to run using version v2 patch 0.

In this section, you modify the setup script of the app to fix the error, create a patch for the update, and upgrade the app.

Modify the setup script¶

To fix the intentional error you introduced in a previous section, remove the following statement from the setup_script.yaml file:

SELECT * FROM table_does_not_exist;

Copy

Upload the updated files and create a new patch¶

To upload the modified setup script to a stage and create a new patch, perform the following tasks:

Run the following command to create a new patch for the app:
When prompted, enter y to add a new patch to the application package.

Update the default release directive¶

In the previous section, you created patch 2 for the app. To set the default release directive for the patch, run the following command from a worksheet:

ALTER APPLICATION PACKAGE na_spcs_tutorial_pkg
  SET DEFAULT RELEASE DIRECTIVE VERSION=v2 PATCH=2;

Copy

Upgrade the app and verify the version of the service¶

After creating a new version and setting the default release directive, upgrade the app and test the service by performing the following tasks:

To upgrade the app from version v2 patch 0 to version v2 patch 2, run the following command:
```
snow app run --from-release-directive -c tut-connection
```
Copy
To verify the version of the service that is currently running, run the following command from a worksheet:
```
SELECT na_spcs_tutorial_app.core.my_echo_udf('hello');
```
Copy
To view the status of the app, including the version that is currently installed, run the following command:
```
DESC APPLICATION na_spcs_tutorial_app;
```
Copy
In the output the version property is v2 and the patch property is 2.

Review what you learned in this section¶

Congratulations! You successfully upgraded the app after the upgrade failure.

In this section, you completed the following tasks:

Fixed the error in the setup script.
Created a new patch, p2, to update the app.
Upgraded the app to the new patch.

Tear down the app and objects created in the tutorial¶

Because the app uses a compute pool, it uses credits in your account and costs money to run. To stop the app from consuming resources, you must tear down both the application object and any of the account-level objects it created, such as the compute pool.

To confirm that the compute pool is currently running, run the following command:
```
snow object list compute-pool -l "na_spcs_tutorial_app_%"
```
Copy
If the compute pool is running, a row with an ACTIVE compute pool that was created by the application object is displayed.
Run the following Snowflake CLI command to tear down the app:
```
snow app teardown --cascade --force -c tut-connection
```
Copy
This command removes all of the Snowflake objects created by the app. Without the --force option, this command does not drop the application package because it contains versions.
To confirm that the compute pool was dropped run the following command again:
```
snow object list compute-pool -l "na_spcs_tutorial_app_%"
```
Copy
This command returns no data if the compute pool has been dropped successfully.

Note

The snow app teardown command drops both the application package and application object. Therefore, any stateful data is lost.

Learn more¶

Congratulations! In this tutorial, you learned how to manually upgrade an app with containers.

Summary¶

In this tutorial, you completed the following tasks:

Added a version initializer stored procedure to handle services during upgrades and failures.
Created a new version definition of the app in the application package. Version definitions specify the version number and patch of the app.
Set the default release directive for an app. Release directives determine which version and patch is installed when a consumer installs or upgrades an app.
Upgraded an app and verified what happens during upgrade failure.